Tutorial For Flashing Your Nokia 5530/5800

Hello taringueros!...


I come to bring a in order to Flash their nokias, but first of all, not me responsibility for damage on their computers, make this procedure of flashing at their own risk because an incorrect use of this must be well loaded before doing this procedure, because if just the battery of your cell phone in the middle of the procedure may be dead, but if that happens, just buy a universal charger or another charged battery and then try Flash.

Also soon make its backups of all the contacts, messages, images on your cell phone with the (this Suite you have to be installed before you do anything), and remove everything with in micro SD (but can not remove the music, pictures, and videos folder)

Now if the !
They must first have the who want to install on your Nokia, I suggest you this for 5530 and :


(download the core and the C6v41 ROFS2)

or this one for 5230, , , and X 6:


then download this pack for uploaded flashing by my:


already downloaded the pack, install the file"JAFSetup_1.98.62" on your computer (if get you a message that you want to install the latest version, just select no), then look for this folder "programaNokiaPhoenixProducts reported" (the address of the folder may vary), and then make a folder with the name of the RM of its in the image



and if they do not know their nokias RM, only mark * # 0000 #



and then search for "Type" in the image



(in my case, is RM-504 because I have a 5530).

then, stick the downloaded into that folder


(in my case are 7 archives)...

Then, open the "5 OGM_JAF_PKEY_Emulator_v" which also come in the pack for Flash



Select "GO", perhaps leave them an error message, but just ignore it and ready, then open a window like this

/>

just make click on the "BB5" tab and select the options in the following order:

1.- Normal mode
2.- Dead USB
3.- Manual Flash
4.- Use INI
(this option always her selected at the end)



then a window will appear you with all models , only looking for the model of your cell phone



and if you don't find the model of the , just copy the file "jaf_nok4models" (comes with the pack for flashing) and paste it in the folder where you installed , also put the instructions in the pack

then they turn off your cell phone and give you the "" button



then it will leave a warning message, but also ignore, and then crushed button prendido on the phone (but did not ignite, crushed you just a little while), then the cell phone screen power white, but not scared is normal, they wait for the procedure finish, until it comes out this:



and then your cell phone starts onlystyle = "position:absolute;" top:-376px; "clip:rect(374px_16px_390px_0px);" vspace = "2" hspace ="3" / > , but if stayed with a message on the screen of your cell phone that says "Local mode", just select "Normal" in where it says "Phone Mode"



and if still does not start and stays with that message, just take out the battery and to put then just turn the phone back

Note: If the comes the message "Done" but his cell phone was turned off and does not turn your cell phone died!... but not worry , to revive it only remove the battery and then they come back to, then again to try to make the , but look at the is based on the latest version of their cell phones, because if they installed a with a lower version would be downgreando (returning to an old version) and if they do that normally your cell phone diesfor example, in my case, just install with v40.0.003, because if I install a with v32.0.007 would be downgreando.

and ready!... hopefully have served them, if they did not understand something, or they pass some problemI only know by writing a comment because I believe it fails well explain how to Flash in this post , if if served them and they succeeded in flashing, just appreciate!

^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^

Also visit my other post:
-
-
-
-
-
-
-
-
-
-
-
-
-
Do-
-
/>

vspace = "2" hspace ="3" / >