Unlock Samsung Galaxy 550, Spica, Ace, Mini, Pro, And FitMonday 9th of January 2012 12:54:00 AM
Welcome
Finally after much wait... of thethe guys at XDA Developers hand becomes a simple method of release, fast and without risk to our phone with Android 2.2 or later (does not work in Eclair). Following these simple steps to the letter you will be able to your Android phone in just some minutes. Before moving on to the requirements that we need, I answer a couple of questions that surely go floating around your head.
IMPORTANT READING THIS: COMPULSORY
FREQUENTLY ASKED QUESTIONS
Do * I brickear, break, fuck my cell following this procedure?NO
* Have to change some important internal file for the system? NO
Do * need to do a Hard Reset or something that touches my data and/or applications?NO
Do * lost my warranty to do this?SI (Once your phone is uncoupled from the operator, they are no longer more responsible)
* I don't have the root phone, I can release it? NO
* My phone has another value once released? SI (In theory it is worth twice, for new phones without use)
Do * there is any chance that my operator to detect what I did?NO
* Is illegal to my phone on my own? Not... but it seems to me little ethical some alive that are making money with this send me MP telling me that I'm an idiot for taking the secret to light. I leave to your criterion
/ >Notice: before commenting on an outrage I ask you strongly to read the Post.
This method is not the famous Médoto from XDA leaving useless phones.
HERE NOT BE MODIFYING ANY FILE SYSTEM. NOT TOUCHED ANYTHING INTERNAL PHONE. IF SOMETHING GOES WRONG, THE PHONE REMAINS THE SAME AS ALWAYS. ONLY COPY A FILE TO ANALYZE IT IN THE PC AND EXTRACT THE CODE OF UNBLOCKING, DID NOT RETURN TO COPY ANY MODIFIED FILE INSIDE THE CELL AGAIN.
Supported models: Referred to in the title of the Post
Samsung 5 / / Europe (i5500)
Samsung 551 / Callisto (i5510)
Samsung (i5700)
Samsung 3 (i5800)
Samsung Pro (i5510)
Samsung (S5570)
Samsung Fit (S5670)
Samsung (S5830)
Samsung Pro (B7510)).
Apparently has not worked in a Galax (i9000) e (i9001). Only for versionsAndroid Froyo and above... 2.2 +
Attention: It is not working in some modified ROM, CM7 (CyanogenMod7) unlock code window does not appear. It is not confirmed if it works with Motafoca. If work in MAD ROM 2.4. So far it has only tested with factory ROMs and officers of the operators. I recommend flashing an official ROM, the phone and then Flash your ROM modified.
REQUIREMENTS for the phone
First make sure that the phone is not locked, would be useless to try to a device that is already released. Anyway the process not could be carried out if it were.
We are going to the dial keypad and digitamos the verification code, State of blocking of SIM, which is as follows:
* # 7465625 # (if you remember best is * # #)
Then verify that the lock is in effect, i.e. ON, we will need the following elements:
*1 The phone must be root
*2 A Hex Editor. Here 2 Freeware "Free": Winhex and XVI32 or through this QR code.
*4 A SIM CHIP from another company than the yours.
PROCEDURE
Download and install Terminal Emulator of one of the links above and execute on your phone.
Important to keep in mind, probably have problems to enter the commands with the keyboard 3 x 4 or the customized keyboards that one download of the Market. I recommend that you use the keyboard by default of , not keyboard Swipe please.
Typing the command its have superuser permissions, we will receive a dialog box in which we are going to click allow.
/ > Then enter the command cat /dev/block/bml5 > /sdcard/bml5.img do very carefully, it is important to that not comets no syntax error, so write slowly and perhaps which as you read it here. What I write in caps so that you understand, but the command must be entered in lowercase, the entire procedure depends on this command: CAT /DEV/BLOCK/BML5 >/SDCARD/BML5.IMG after CAT , there is a space, it is the only space. With this command we gave the order to write an image IMG file on the SD memory card.
Now type the command exit to exit the superuser mode and then the command exit once more to exit the console or Terminal.
Once completed this process, we will be able to locate and identify the BML5 file on the SD memory card, in the root directory. We are going to copy and transfer this file to the PC through the USB Cable, with either the memory card in a card reader or through Wi-Fi to Wi-Fi Explorer. Even you can send it to your own Gmail box if not you can with any other media. It's all for now, with the phone. Let's leave the phone on hand for a minute.
We are going to the PC, for convenience, you should copy the BML5 file on the desktop, I imagine you already downloaded and installed the Editor Hexadecimal, I am going to use XVI32:
1 run.
2-give it to the Open button (open)
3 Select the BML5 file
4. it opened.
5 Click the search button...
6 - In the search box in the Hex String section copy and paste the following:
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 30 30 30 30 30 30 30 30
7 Leave the defaults and click OK
We will get a search result, but still not the result we want to...
8 Press the F3 key to search for the next result
(Attention: in the case of Fit was obtained the code the first time that did push F3, it was the result of the 00000000 eight zeros, but pressing F3 repeatedly came to the result) Thanks to Thusing for the cooperation.
9 And there... is a sequence of 8 numbers in front of the marked by cursor symbol. These numbers are our phone unlocking code. Let's write down on paper or on a Notepad (not on the phone). If 8 numbers 00000000 zeros will appear in front of the blue symbol, you did something wrong... I recommend that you open the file and do the search again, step by step.
For those who are having problems to find the unlock code
After pressing F3 in step 8, we are going to get a result like this, that of eight zeros (00000000)
/>Depending on the model of your phone... in some cases we will have to press F3 repeatedly over until you get a numerical result in front of the blue Cursor. What happens when I get a result of less than 8 numbers?
The result is there, we just have to upload a line to view correctly
Another example
These numbers are our phone unlocking code. Let's write down on paper or on a Notepad (not on the phone).
We're almost! We are now back to the phone... are going to turn it off and remove the SIM or CHIP from your operator. We put the SIM of another operator. We start and we are going to appear a dialog box like this:
Notice: before commenting on an outrage I ask you strongly to read the Post.
This method is not the famous Médoto from XDA leaving useless phones.
HERE NOT BE MODIFYING ANY FILE SYSTEM. NOT TOUCHED ANYTHING INTERNAL PHONE. IF SOMETHING GOES WRONG, THE PHONE REMAINS THE SAME AS ALWAYS. ONLY COPY A FILE TO ANALYZE IT IN THE PC AND EXTRACT THE CODE OF UNBLOCKING, DID NOT RETURN TO COPY ANY MODIFIED FILE INSIDE THE CELL AGAIN.
We're almost! We are now back to the phone... are going to turn it off and remove the SIM or CHIP from your operator. We put the SIM of another operator. We start and we are going to appear a dialog box like this:
* I apologize a thousandfor using this image in English, my phone was unable to make a screenshot.
Here we introduce the SIM unlock code of 8 numbers and give unlock/OK... and...
Congratulations! Your is released!
* Note: The unlock is done only once. The phone is released once and for all.
I hope know value the time and effort that led me to make this Post, that you enjoy... and enjoy their phones !
